Paver Edge Restraint Calculator
Estimate paver edge-restraint length, full stock pieces, anchoring spikes and material cost for rectangular patios, paths and parking areas.
Default project preview
14 pieces
Required restraint length
72 ft
Order length
79.2 ft
Purchased stock length
84 ft
Anchoring spikes
98
Calculator
Build the material order
Your order will appear here
Enter the project details and calculate a rounded material estimate.
Input and output guide
What each value means
The labels and units below are part of this calculator’s visible methodology. Replace every default with measurements or product data from the actual project.
Paved area length
Enter this project assumption in ft. The current imperial default is 24 ft.
Paved area width
Enter this project assumption in ft. The current imperial default is 16 ft.
Edges not requiring restraint
Enter this project assumption in ft. The current imperial default is 8 ft. Minimum: 0.
Additional interior or curved edge
Enter this project assumption in ft. The current imperial default is 0 ft. Minimum: 0.
Cut and curve allowance
Enter this project assumption in %. The current imperial default is 10 %. Minimum: 0. Maximum: 75.
Stock restraint length
Enter this project assumption in ft. The current imperial default is 6 ft.
Spike spacing
Enter this project assumption in in. The current imperial default is 12 in.
Spikes per pack
Enter this project assumption in a unitless value. The current imperial default is 50. Minimum: 1.
Price per restraint piece
Enter this project assumption in a unitless value. The current imperial default is 14. Minimum: 0.
Price per spike pack
Enter this project assumption in a unitless value. The current imperial default is 18. Minimum: 0.
How to read the outputs
Required restraint length
after excluded and added edges. Default preview: 72 ft.
Order length
10% allowance included. Default preview: 79.2 ft.
Purchased stock length
full pieces. Default preview: 84 ft.
Anchoring spikes
spacing plus piece ends. Default preview: 98.
Spike packs
50 spikes per pack. Default preview: 2.
Material cost
restraint pieces and spike packs. Default preview: $232.00.
Methodology
Transparent calculation
BuildMeter converts every input to a consistent internal unit, applies the selected allowance, and rounds products up to whole purchasable units.
Required edge = rectangular perimeter − excluded edges + additional edges. Pieces = round up (required edge × allowance ÷ stock length). Spikes are estimated from purchased length and entered spacing.
BuildMeter Guides
Understand the measurements and assumptions
Use these visible reference guides before changing project inputs or planning allowances.
FAQ
Paver Edge Restraint Calculator questions
Which edges can be excluded?+
Edges held by a rigid wall, curb or other approved boundary may not need separate restraint, depending on the installation.
Do curved edges need more material?+
Usually yes. Curves can require extra cuts, flexible products and closer anchoring.
Why add spikes at piece ends?+
The estimate includes a small allowance for securing stock-piece ends in addition to regular spacing.