Drywall Tape Calculator
Estimate drywall tape length, full rolls, sheet count, purchased length and material cost from board coverage, seam assumptions and inside corners.
Default project preview
3 rolls
Approximate sheets
32
Base tape length
592 ft
Inside corners
80 ft
Purchased tape
750 ft
Calculator
Build the material order
Your order will appear here
Enter the project details and calculate a rounded material estimate.
Input and output guide
What each value means
The labels and units below are part of this calculator’s visible methodology. Replace every default with measurements or product data from the actual project.
Drywall surface area
Enter this project assumption in ft². The current imperial default is 1000 ft².
Area per drywall sheet
Enter this project assumption in ft². The current imperial default is 32 ft².
Average seam tape per sheet
Enter this project assumption in ft. The current imperial default is 16 ft.
Inside-corner length
Enter this project assumption in ft. The current imperial default is 80 ft. Minimum: 0.
Extra allowance
Enter this project assumption in %. The current imperial default is 10 %. Minimum: 0. Maximum: 50.
Tape roll length
Enter this project assumption in ft. The current imperial default is 250 ft.
Price per tape roll
Enter this project assumption in a unitless value. The current imperial default is 8. Minimum: 0.
How to read the outputs
Approximate sheets
from entered sheet area. Default preview: 32.
Base tape length
seams and corners. Default preview: 592 ft.
Inside corners
entered separately. Default preview: 80 ft.
Purchased tape
full rolls. Default preview: 750 ft.
Unused capacity
above estimate. Default preview: 98.8 ft.
Tape cost
tape rolls only. Default preview: $24.00.
Methodology
Transparent calculation
BuildMeter converts every input to a consistent internal unit, applies the selected allowance, and rounds products up to whole purchasable units.
Base tape = estimated sheet count × seam tape per sheet + inside-corner length. The allowance is applied before rounding full rolls up.
FAQ
Drywall Tape Calculator questions
Why estimate tape per drywall sheet?+
The board layout controls seam length, so an editable per-sheet rate provides a practical planning estimate.
Does this include outside corners?+
Outside corners usually use corner bead and should be estimated with the corner-bead calculator.
Does it calculate joint compound?+
No. Compound consumption depends on finish level, coats and workmanship.