Landing volume, bags, forms and cost

Concrete Step Landing Calculator

Estimate concrete volume, bags, landing area, form perimeter, placed weight and cost for rectangular step landings.

Imperial and metric Rounded purchase quantities Cost estimate

Default project preview

0.49 yd³

Concrete bags

22

Landing area

24 ft²

Base volume

0.44 yd³

Form perimeter

20 ft

Calculator

Build the material order

Your order will appear here

Enter the project details and calculate a rounded material estimate.

Input and output guide

What each value means

The labels and units below are part of this calculator’s visible methodology. Replace every default with measurements or product data from the actual project.

Landing length

Enter this project assumption in ft. The current imperial default is 6 ft.

Landing width

Enter this project assumption in ft. The current imperial default is 4 ft.

Landing thickness

Enter this project assumption in in. The current imperial default is 6 in.

Equal landings

Enter this project assumption in a unitless value. The current imperial default is 1. Minimum: 1.

Extra allowance

Enter this project assumption in %. The current imperial default is 10 %. Minimum: 0. Maximum: 50.

Concrete yield per bag

Enter this project assumption in ft³. The current imperial default is 0.6 ft³.

Ready-mix price

Enter this project assumption in per yd³. The current imperial default is 165 per yd³. Minimum: 0.

Price per bag

Enter this project assumption in a unitless value. The current imperial default is 7. Minimum: 0.

How to read the outputs

Concrete bags

rounded full bags. Default preview: 22.

Landing area

all landings. Default preview: 24 ft².

Base volume

before allowance. Default preview: 0.44 yd³.

Form perimeter

outside edges. Default preview: 20 ft.

Placed weight

planning density. Default preview: 1,978 lb.

Cost comparison

ready-mix / bags. Default preview: $80.67 / $154.00.

Methodology

Transparent calculation

BuildMeter converts every input to a consistent internal unit, applies the selected allowance, and rounds products up to whole purchasable units.

Volume = landing length × width × thickness × quantity. Allowance is applied before bag rounding.

Related tools

Continue planning the project

FAQ

Concrete Step Landing Calculator questions

Does this include the steps?+

No. Estimate stair concrete separately.

Should an exterior landing slope?+

Drainage must be designed for the site.

Does this include a footing?+

No. Footings and thickened edges are separate shapes.

Built and reviewed by Liron Elimeleh

Liron Elimeleh, software engineer and founder of BuildMeter, develops the calculation logic, unit conversions, validation and visible assumptions. ELStudios maintains the source and public correction history.

About the author