Cabinet Hardware Calculator
Estimate cabinet pulls or knobs, hinges, spare pieces, package quantities and installation cost for kitchen, bathroom or storage cabinetry.
Default project preview
$460.00
Pull or knob packs
4
Hinge packs
2
Base pulls or knobs
30
Base hinges
36
Calculator
Build the material order
Your order will appear here
Enter the project details and calculate a rounded material estimate.
Input and output guide
What each value means
The labels and units below are part of this calculator’s visible methodology. Replace every default with measurements or product data from the actual project.
Cabinet doors
Enter this project assumption in a unitless value. The current imperial default is 18. Minimum: 0.
Cabinet drawers
Enter this project assumption in a unitless value. The current imperial default is 12. Minimum: 0.
Pulls or knobs per door
Enter this project assumption in a unitless value. The current imperial default is 1. Minimum: 0.
Pulls or knobs per drawer
Enter this project assumption in a unitless value. The current imperial default is 1. Minimum: 0.
Hinges per door
Enter this project assumption in a unitless value. The current imperial default is 2. Minimum: 0.
Spare hardware allowance
Enter this project assumption in %. The current imperial default is 10 %. Minimum: 0. Maximum: 50.
Pulls or knobs per pack
Enter this project assumption in a unitless value. The current imperial default is 10. Minimum: 1.
Hinges per pack
Enter this project assumption in a unitless value. The current imperial default is 20. Minimum: 1.
Price per pull or knob pack
Enter this project assumption in a unitless value. The current imperial default is 35. Minimum: 0.
Price per hinge pack
Enter this project assumption in a unitless value. The current imperial default is 28. Minimum: 0.
Installation cost per fitted piece
Enter this project assumption in a unitless value. The current imperial default is 4. Minimum: 0.
How to read the outputs
Pull or knob packs
10 pieces per pack. Default preview: 4.
Hinge packs
20 pieces per pack. Default preview: 2.
Base pulls or knobs
before spare allowance. Default preview: 30.
Base hinges
before spare allowance. Default preview: 36.
Hardware material
full packs at entered prices. Default preview: $196.00.
Installation allowance
base fitted pieces only. Default preview: $264.00.
Methodology
Transparent calculation
BuildMeter converts every input to a consistent internal unit, applies the selected allowance, and rounds products up to whole purchasable units.
Base hardware = cabinet count × pieces per cabinet. Spare allowance is added and pieces are divided by pack size, rounded up. Cost adds full packs and the entered installation rate.
FAQ
Cabinet Hardware Calculator questions
Should drawers wider than normal use two pulls?+
Some wide drawers use two pulls or one longer pull. Enter the actual hardware count planned per drawer.
Why order spare cabinet hardware?+
Spares help with damaged finishes, misplaced screws and future replacement when a matching style is discontinued.
Does this choose the correct hinge?+
No. Hinge type depends on cabinet construction, overlay, inset, opening angle and door dimensions.